in front of the radiator, behid the bug screen.
In order to remove a stuck transmission filter from a case sl series 2 backhoe consult with an individual at one of the auto shops. The owner's manual will also provide the information needed to make this repair.
Look for a hinged panel between the loader uprights. That is where the hydraulic reservoir fill port is located. Lift the hood for better access.
hydraulic oil,AW-300
Case sells Hy-Tran Ultra, which is what you want.
29 gallons with loader and backhoe.21 with loader only.25 with loader and 3 pt hitchReservoir refill with filter change is 17.
its in side the transmission case , can not be changed without removing the transmission and splitting the case
The Case backhoe was introduced in the year 1842 in the United States. The fuel consumption for a 580 Case backhoe is one gallon for every twenty horsepower.
It is inside the transmission case. According to Kia, the filter is only replaced during overhaul of the transmission. You have to separate the case halves to replace the filter. This trans has no lower pan.
A backhoe excavator is one that has a loading bucket on the front and a hoe on the back. Such as a Case 580 backhoe
Inside the transmission case. It is not servicable without removing and tearing down the transmission.
1959
The manual says 8 quarts or 7.6 liters of case TCH fluid ,you can use Hy-tran Ultra hydraulic fluid. I use the hydraulic transmission fluid from tractor supply and have no problems.