Letter H is stamped out on back of washing machine above or beside correct inlet for hot water.
You follow the instructions that came with the machine. You connect up the cold and hot water feed pipes as instructed and then plug it into the mains. If it a new machine you may also have to remove the packing stabilisers first.
There are a few reasons why your washing machine is not filling up with hot water. A tube could be plugged. There may also be an issue with the hot water heater. Have a professional check the machine.
Washing machines get water from your plumbing, if it is hot, then it costs you to run your hot water heater to heat up the water.
If you are wanting to install a washing machine and the plumbing is already there, it is a cinch! Remove the old washer (Unscrew the water supply lines and unhook the drain hose). Make sure you get new water supply hoses. I like the steel braided hoses for extra strength and piece of mind. Hook up your new hoses to the correct inlets on your washer (they are marked H for hot and C for cold) Hook up your drain hose, level the washer and you are good to go! Check out the related links to get a better feel for how to install a washing machine.
Make sure hot and cold supply go to hot and cold on washing machine regardless of what is marked on hose. Hoses are marked so hot and cold don't get mixed up, that's all.
Can you change a regular washing machine into a portable to hook up to the kitchen sink
cos a washing machine has concrete in it which weighs loads
you can hook up to Hot Spots for free
Agitators in a washing machine help to move that water around in the machine and also the clothes. This helps break up the dirt and cleans the clothes.
To ground it. Washing machine build up a lot of static electricity.
what would be needed to drain a washing machine up from a basement? We have power and water, as the water heater is in the basement, but the drains are about five feet up.
It saves waste water backing up to or from the washing machine.