Horses are strong, amps have no strength at all unless they have volts riding along with them.
The power of an amp is the current in amps times the voltage in volts. So 1 amp at 746 volts equals 746 watts, which is also one horse-power. The same wcould be achieved by 10 amps at 74.6 volts.
How to convert horsepower to amps? You'd have to make an assumption about volts. If it's running at 220 volts, that would make it 34 Amps. There are 746 watts in a horsepower and Amps = Watts/Volts.
12 amp is stronger than 9 amp by 12/9
Wrong data in question Ask again
The horsepower of the motor is needed to complete this answer.
FLA = full load amps <<>> It is a term that is associated with motors. It is the amperage of the motor when it operates at its full rated horsepower under load.
You are thinking watts to horsepower, not amps to horsepower. Please restate the question.
Motor horsepower. It is a combination of volts times amps and divided by 754. If they won't provide the vacuums technical data don't buy it. Design and ease of use. Does it work? That is what to look for.
You don't. The units measure different things.
How to convert horsepower to amps? You'd have to make an assumption about volts. If it's running at 220 volts, that would make it 34 Amps. There are 746 watts in a horsepower and Amps = Watts/Volts.
1 horsepower = 746 watts, 1 watt = 1 volt x 1 amp => 20 Horsepower = 14,920 watts => 14,920 watts / 220 volts = 67.82 amps
Amps.
12 amp is stronger than 9 amp by 12/9
An electromagnet becomes stronger when the current through it increases, i.e. the Amps.
You need to know the voltage as well before the conversion can be made.
The relationship between horsepower (HP) and amps depends on several factors, including the voltage of the electrical system and the efficiency of the device or motor being measured. The relationship can be calculated using the formula: Power (in horsepower) = Voltage (in volts) xCurrent (in amps)/746 Where: Power is measured in horsepower (HP) Voltage is measured in volts (V) Current is measured in amperes (amps) The number 746 is a conversion factor used to convert watts (W) to horsepower (HP). So, if you know the voltage and current of an electrical device, you can use this formula to calculate the power in horsepower. Conversely, if you know the power in horsepower and the voltage, you can rearrange the formula to solve for the current in amps. It's important to note that this formula assumes a certain level of efficiency and power factor for the device being measured. In real-world applications, the actual relationship between horsepower and amps may vary based on factors such as motor efficiency, power factor, and other electrical characteristics.
That will depend on the voltage together with the amperage. Multiply voltage times amperage to get the watts. There are about 746 watts to one horsepower. A 220 volt circuit at 17.60 amps would be about 5.2 horsepower.
it cant someone in marketing is lying Regarding any electrical equipment, especially motors, 746 watts or volt-amps is 1 horsepower. If your table saw is rated 4 horsepower, that would be 2984 volt-amps and at 110 volts that calculates to 27 amps. The above answer is correct. At 110 volts you cannot run a 4 horsepower motor on a 15 amp circuit. <<>> The above theoretical answer is correct however you should allow extra for efficiency less than 100% and a power factor less than 1, so the current requirement should be increased by 25% to 34 amps. <<>>The rule of thumb for motors at 240 v is 7 amps per HP, which would be 28 amps for 4 HP, but because the voltage is less the current must be more, 28x240/110 which is 61 amps.