0
Which type of infrared network bounces the signal off ceilings and walls?
Wiki User
∙ 15y ago
Infrared scatter
An infrared signal that is bounced off ceilings and walls. Devices can connect without line of sight, but data transfer rates are lower, and distances are shorter.
Wiki User
∙ 15y ago
Wiki User
∙ 11y agoScatter
Add your answer:
Earn +20 pts
What is infrared bug?
without the presence of infrared transmitter we can find the i.r signal with the combination of electronic component. this is bug
What Signal is transmitted by frequencies in the 300- GHz to 300000-GHz range which is just above the top of the wireless spectrum as it is defined by the FCC?
Infrared
What are limitations of infrared?
The distance that the signal can travel. This is due to the very short wavelength which varies from .7 to 300 um in the presence of air
What is an IR Thermometer and what does it do?
The most basic design consists of a lens to focus the infrared (IR) energy on to a detector, which converts the energy to an electrical signal that can be displayed in units of temperature after being compensated for ambient temperature variation.
What are the uses of infrared detectors?
I believe infrared detectors measure heat being given off by an object. However since everything gives off heat.. the detectors have to be cooled down to very low temperatures themselves using liquid helium croyogen. Emma D
What is infrared bug?
without the presence of infrared transmitter we can find the i.r signal with the combination of electronic component. this is bug
What materials can block a infrared signal from a remote control?
Anything that is opaque.
What is Infrared reciver tsop 1738?
it is used for reciving the infrared signal of frequency 38khz from a remote location at distance may be 10 m.
How does a LED light works in a motion sensor detector?
Two pairs of Infrared LEDs are used as motion sensor detector. The first one is wired to emit LED and the second is wired to transmit a signal when it receives an infrared input. this infrared is reflected back to the receiving LED and then the signal is produced. This signal can be used to open sliding doors, turn on a light or set off an alarm.
Will include a TDR time domain reflectometer that issues a signal on a cable and then measures the way the signal bounces back or reflects to the TDR?
Cable performance tester.
In a network that uses the star topology what is the signal that is sent to indicate a signal collision?
Jam signal
How do you protect against a signal jammer?
how do we protect our cable network from signal jammer
What signals are used for the maintenance and overall operation of the network?
Network Management signal
How does an infrared thermometer work?
The amount of infrared energy in an area varies with temperature, so the infrared thermometer focuses that energy onto a detector and converts it into an electronic signal that reports the temperature.
Which device is used to prevent a signal from bouncing on a thinnet network?
A 50 Ohm Terminator is used at each end of the network to prevent signal reflections.
Which adsl network component removes or combines the pots signal from the adsl signal?
Splitter
What network hardware device regenerates a signal and broadcasts it to every computer on the network?
hub
