Say it was high gloss, if the wood soaks it in deep and you only put two thin coats on
it will not shine like it should.
Because it should shine a lot. Can depend on how much gets absorbed by the wood.
Polyurethane becomes sticky because it takes an hour or longer for the oxygen-induce crosslinking to occur. Polyurethane is a varnish used on wood.
Yes, but be careful of fumes, it can affect you
How you can best clean up spilled polyurethane will depend on where it is spilled. If it is spilled on a laminate floor, rags dampened in mineral spirits will work well. If the spill is on concrete, paint thinner will clean it up.
Try dampening a rag with mineral spirits and try it on a small hidden area of the linoleum. If it is okay, repeat on the polyurethane spill. Use a clean area of the rag each time so you do not spread the polyurethane. Wash the floor thoroughly after you are done; dispose of the rags since they are now a fire hazard.
hypoallergenic polyurethane foam
No, in fact the wax can ruin the polyurethane finish. Clean the floor with a good wood floor cleaner. Do not mop with water.
Polyurethane applied to a floor is virtually never sprayed. It is generally applied with an absorbent pad, frequently made of wool or a synthetic.
Although there are many types of flooring, wood floors are gaining in popularity. You can make your wood floors shine by using a protective wax made especially for wood floors. The wax will help protect the floor from scratches and spills. Clean the floor before you wax by using a wood floor cleaner.
Rubber casters are better for a hardwood floor as they will not scratch the wood surface and not leave black marks on your floor.
About $80 to rent a floor sander and polyurethane is about $25 a gallon. So depends on how big of an area
Screening a floor means a light sanding, just to take off the polyurethane. Coating it, is to reapply to finish.
Cleaners with ammonia will wreak havoc on your floor, so use your better judgment and get polish designed specifically for wood floors. Using the wrong cleaner will make your floor slippery or damage the tone and color of the floor itself.
If your hardwood floor is not shining, it might need some polish. Or, it might just be old. I suggest investing in a new hardwood floor if yours is so ancient that it has lost its ability to be lucent. Or you can have your floors refinished. If they have been sanded recently, you might have a satin sheen in the polyurethane that was applied. If this is the case, all you have to do is re coat it with a semi gloss or gloss polyurethane.
For beautiful wood floors, use Orange Glow (C) And Armstrong (C) floor cleaner works great on tile! Hope it helped!!
Polyurethane coatings do a number of things. First, they seal the pores of the wood making the wood unable to absorb moister and thus preventing rot. Secondly, urethane allows the floor to be cleaned more easily by providing a smooth surface. Third, they help to prevent scratching or gouging of the floor by providing a 'slippery' surface that objects can slide across. Fourth, some urethanes have a built in UV inhibitor which can keep the wood from discoloring.
with floor shine
Polyurethane becomes sticky because it takes an hour or longer for the oxygen-induce crosslinking to occur. Polyurethane is a varnish used on wood.