A microscope should be stored in low power objective lens because the lens can scratch against the lens.
It should be stored with the low-power objective in place.
low power objectives....
low power objective! :)
There's LOW, MEDIUM, and HIGH power.
the Revolving Nosepice is use to switch beween the Objective lenses. you can simply go from Low power Objective to High power by rotating the nosepice
It should be stored with the low-power objective in place.
Coarse Adjustment
The high power objective in a microscope is the largest lens in the microscope.
The lower power objective for the microscope is the small lense on the microscope. The size usuall ranges at 4x on the microscope.
high power objective
The magnification of the microscope
The high-power objective magnifies the image 4x.
lowest power, i think 40x
Do not allow the high power objective to tough the lenses
refers to the power of a microscope;calculated by multiplying the power on the objective by the power on the eyepiece?
The low power objective is small lens with low magnifying power.
it is 50 on my microscope.............................