answersLogoWhite

0


Best Answer

Try replacing the headlight switch. Do the front parklights work and not the rear ones? If so check the harness to the rear of the vehicle for breakage.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why are the tail lights and license plate lights not working but the turn signals and brake lights and reverse lights are and you already replaced the bulbs and fuse?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Turn signals on your 1994 Pontiac grand prix come on but do not flash .flasher has already been replaced?

Check bulbs could be bad switch in steering column


Turn signals on subaru impreza have stopped working checked all fuse plus relays .can anyone help cheers?

check if reverse lights are working, if not replace the reverse switch plug located underside near the gear box, centre of car, there are two plugs, check if wires are frayed, this happened to me and when I replaced this my turn signals started working. hope this helps


What could be wrong if your turn signals do not work but your hazard lights work?

Most vehicles have two flasher units. One for the turn signals and one for the hazards. If you have already replaced one try looking for the other one. Or check for a bad trunsignal switch


Already replaced Isuzu flasher unit with new one - hazards work but turn signals do not - both sides?

u have two flashers on your car... one for blinkers and one for flashers.


Transistors replaced to amplify electric signals?

vacuum tubes


Why do your hazard light works but turn signals do not in a 2001 ford ranger already replaced flasher?

It should be the fuse, in the fuse box at the Driver Side, check for the number 10 Fuse (7.5 Amp) it might be blown


1999 Jeep GC that the turn signals and hazards do not work Headlights and interior lights are ok and have replaced turn signal lever already any advise?

Most obvious thing to check would be the flasher relay located under the bonnet


Why are Hazards working but indicators not flashing on Audi tt?

It contains two relays, one for hazard lights and the other for turn signals. The one for the turn signals is defective and must be replaced.


Why don't my turn signals flash. Already changed the flasher?

check you light bulbs


How do you remove turn signals and side markers on an 09 jeep wrangler?

let the wife reverse park in to a small space


Why have your turn signals died on your 1991 Pontiac Firebird?

Turn signals just quit working- have replaced flasher- checked all bulbs and fuses, checked all obvious wires, cleaned grounds, replaced the turn signal switch (that was an adventure). At a loss- any help out there? Hazards work fine- all other lights work fine- turn signals dead


Turn signals dont work replaced the switch?

Check fuse Check bulbs--they are double filamented with the smaller for turn signals Replace turn signal flasher--Most common problem