IP Address
Additional info:
The IP address for a client may not be on the correct subnet; it is possible that the subnet mask is incorrect.
Media is always required to connect one device to another on a network. It doesn't matter if it is a client server network or a peer to peer network.
a way or means to connect to the network & access network resources....
Without a subnet mask a client is not able to participate on a network because the network software is unable to determine the network addresses.
The Novell client for Windows is used to connect your Windows XP computer to a Novell NetWare network.
A DHCP (Dynamic Host Configuration Protocol) scope defines the valid pool of IP addresses that can be assigned to the network. You need to activate a DHCP scope so that the IP addresses that are issued (or leased) to the client devices will be compatible with the network configuration. If a client is issued an invalid IP address it will not be able to communicate on the network.
The client's BIOS doesn't support network card boots, the client does not have a PXE-enabled network adapter card.
ip addressing is simply configuring the router for your local network by assigning IP addresses for each client in your network creating logical networks inside your local network. for more info see related link.
The DSN server translate URLs in to IP addresses so the client can connect with a web site.
The client attempts to connect to a designated network detection server on the intranet.
Pretty much a client server network is known as a client server network.
Network Operating system or NOS is an OS that allows a system to connect to a network. Such as Novell and Artisoft's LANtastic. In the old days of DOS networking was not a function of the Client OS, you have to also load the NOS to get connected. Now that most Client OS's imbed network connectivity the term is now seldom used.
A DHCP server will privide a client with a valid IP address for the network for which the DHCP server is providing a service.Where there is no DHCP server the IP address for a client must be set manually. When doing this care must be taken to ensure that two IP addresses are not set the same on the network.