...make your hot water reach each tap quicker than if no recirc line is installed.
It's a recirculating hot water line used so hot water is available at taps much quicker than with just single hot water line.
That water is used in the cold taps in your bathroom and for the heated water you use. Don't drink from these taps.
The ratio of windings between a primary and secondary in a transformer govern the output voltage. Multiple taps are connections to various points in the coil effectively changing the winding ratios to get multiple voltages from the same transformer. Taps can be on the primary, secondary or both to provide a more versatile transformer.
Singapore's 4 national taps Singapore's 4 national taps are:1) Water from local catchment2) Imported water from Johor3) Desalinated water from the sea4) Reclaimed/Recycled water from local waste water (NEWater)
taps
Taps need not be made with metal.... But most taps are because they don't melt if hot water passes through............
Check the upstairs taps for blockage in aerator or internally.
turn of taps
A transformer has input and output connections, a primary winding with or without taps, and a secondary winding or windings with or without taps. It also has a core and appropriate wrappings, and it sometimes has a housing.
The four national taps are the Local Catchment water, Imported water, NEWater and Desalinated water.
Usually there are no letters on French taps; some old taps bear the letters C (for chaud = hot) and F (froid = cold). Hot water taps are always located on the left side, cold water taps on the right. It is also standard to find color marks (blue for cold, red for hot) on the taps. On newer models, having a central lever instead of two taps, you turn the lever to the left for hot water and to the right for more cold water. Also the blue and red marks may be found on these type of taps.
Underground/Above ground pipes from the water station
by turning the taps of when your not using it