It is corrugated so it can bend without collapsing.
Where it says vacuum hose
Its the hose that attached to a vacuum. Its where the suction is transferred from the vacuum cleaner to any attachments. Its also generically referred to as a vacuum for your car.
A vacuum cleaner has many parts, including the hose and the on and off switch. A vacuum also has a container which holds the dirt and dust that the vacuum sucks up.
Remove the vacuum hose from the sensor. Pull the sensor out of the air cleaner housing. Insert the new sensor into the air cleaner housing and attach the vacuum hose.
a vacuum cleaner hose?
Like any other above ground pool, maunally with a hose, pole and vacuum, or with an automatic cleaner.
a hose that will fit it and lubrication but a vacuum cleaner works
Disconnect the hose and put a dinner knife down the hose and the weight of it should shift whatever is stuck if you "wave the hose" gently. Alternatively, if you have a vacuum that exhales air, you can try that as well.
Like any other above ground pool, maunally with a hose, pole and vacuum, or with an automatic cleaner.
The Dyson DC04 is a vacuum cleaner. It is used to clear hard to reach dusts and is approved by allergy studies. The British Allergy Foundation recommends this vacuum cleaner as it can reduce Dust Mites.
That depends on the distance to the vacuum cleaner. The closer, the louder.
Follow the directions for hooking up the vacuum either the one that uses the skimmer or the one that hooks up to a garden hose. Make sure all air is out of the hose and you have a good suction. Keep the vacuum head in the water. Then vacuum just like you would vacuum a carpet or floor.