it is a unit in a BTS i.e. base transreciever system..these bts are installed with towers that are used for mobile communication. The piu consists of a power plant and battery bank. power plant has rectifier to convert ac to dc and battery back up is used in case of power failure.
It will segregrate the Battery unit and power supply unit,seperate.----Arun
You should not have to calculate the watts of the unit. All the information that you need will be on the nameplate of the unit. It is this information that electricians use to calculate the conductor size and breaker to supply the power to the unit.
1 is for transmit and 1 is for redundancy
It depends on the power rating of the saw. If it is a 1 KW (Kilowatt) saw then it will use 1 KWH (Kilowatt hour) of electricity for every hour it is used. This is equivalent to 1 unit of electricity. If it is 500 W (Watt) then it will use half this. If it is 2 KW it will use double this.
'Hz' is the symbol for 'hertz', the SI unit for frequency -equivalent to a 'cycle per second'. The frequency of your supply is 50 Hz in Europe, or 60 Hz in North America.The 'watt' is the SI unit for power, which is the rate at which your electrical appliances use energy.
-Power amplifier-Vehicle interface unit
Power is the rate of use of energy in time. The unit of Energy is joule and the unit of Power is joule/second or Watt.
If you use a telecom inventory management system you can manage resource and control costs. This is a central database for organizing telecom invoices and making your life more easier.
The same as any surge arrestor equipment - to prevent surges from damaging the (telecom) equipment.
no you cannot use protools without an interface as a matter of fact you cant use it with just any interface either it must be a protools compatible interface and the software must be compatible with the interface.
______suite normally use a similar interface and share features.
in measuring an engines power
It will segregrate the Battery unit and power supply unit,seperate.----Arun
Any phone that supports Vodafone Live.If on Telecom,then go for a Telecom XT phone.
You don't need a mixer. You will need an audio interface (either USB or Firewire) that has phantom power, that is, 48 volt power to power this condener microphone. With the interface connected, you can use this microphone with Garageband or any other recording software that support CoreAudio hardware.
No, bluetooth is a serial interface.
No, they use picture based interface