Type your answer here... Your PCV value is not working correctly.
the map sencor is located on the upper intake manifold under and inspection cover on the passenger side. this cover can be removed by taking the oil filler neck and cap off.
Oil filler cap cover the hole in the engine where engine oil is added
On the front part of the upper intake manifold under the top engine ccover. remove the opil filler tube to remove the cover.
On the 4.0 L - V6 engine , the engine oil filler cap is on the engine valve cover on the passenger side of the engine
On the V6 engine the power steering reservoir is on the firewall side of the engine below the level of the exhaust manifold. There may be heater hoses or wiring harness over it making the filler cap a little hard to see.
In the engine, usually through an oil filler cap.
Check: Owner's manual, door jambs. fuel filler door, or glove box door for a label
The oil in a snow blower is changed by placing a drain pan under the engine and removing the drain plug. Once empty, the plug is installed, and oil added through the filler cap.
The engine oil filler cap on a 2000 Lincoln Ls is : ( V6 ) drivers side of engine , near the front of the engine , on the top of the engine cover ( V8 ) drivers side of engine , near the rear of the engine , on an extension tube
On the front of the engine
Could be as simple as the fuel filler cap installed incorrectly. Usually a problem in the emission control system - have vehicle scanned to determine the problem
were is the fuel regulator located on a 1988 chevrolet celebrity ? The fuel pressure regulator is located under the intake manifold on the 2.8 V-6 engine but the pressure (Schrader type) test valve port is on the front of the engine to the right and just below the oil filler cap.