0
Fuse or dimmer switch is the only answer i can think of if lights come on but just won't go from high to low or visa versa
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Why will my high beams work but my low beams do not on my 1994 Chevy half ton?
Your high beams work but your low beams do not because the switch is broken that switches between high and low beams. Electrical switches wear out.
2000 Chevy Cavalier low beams do not work but day running lights and high beams work what could be wrong?
As a guess both low beams are burnt out The daytime running and high beams are the same light filament. Or the fuse or the relay for the low beams.
Why do the low beams not work and the high beams work on a Mitsubishi Eclipse?
If low beams do not work and the high beams of a Mitsubishi Eclipse do, it is probably due to a corroded connector. Simply clean the connector and add some petroleum jelly to the terminals.
Why would someone jerryrig the low beams on a 1994 Le Baron to make the low beams work Wire from battery operates low beams Low beams do not work high beams do and so do parking lights?
Bad dimmer switch.
Why would the high beams work and the low beams not work on a 1977 corvette?
Bad bulbs?Bad Hi-low switch?
2002 vw jetta Low beams do not work high beams still work?
Bulbs are burnt. replace both. low and high are together in the same bulb.
Why would the high beams on a 1994 Thunderbird work when the low beams do not?
Headlights have two filaments; one for low beams and one for high beams. There is a good chance that the low beams are burnt out. This doesn't necessarily mean that the high beams won't work. However, it's not too common for both low beams to burn out at the same time. Of course, it could be a fluke. I would replace the headlights with new ones and then go from there.
Why does your low beams not work but your high beams do on a 2002 vw beetle?
Check bulbs Check hi-low switch
Why do your high beams work but not the low beams?
check all the wires that ground coming from the headlight
Low beam bulbs work on the high beam wires?
I'm not sure what you mean by that. Usually low beams have its own coil, high beams have its own. They work on separate cirtcuits.
Why wont high beams work high beams work?
First check the bulbs, if the bulbs are good I would suspect the high/low beam switch is bad.
Why wont the low beams on a 2003 KIA Sedona work even after changing lamps when the high beams work fine?
low beam fuse blown.
