Want this question answered?
Everything you ever needed to know about the Samurai can be found in the Suzuki Service Manual. A FREE copy can be downloaded from http://www.suzukiinfo.com/. zn
Spring side would go down. dome or point would face up.
the shifter sheet needs replaced this can be done without removing the transfer case
they come off with the spring to the knuckle not the brg. opposite of most cars
?
The Sentai that succeeds Engine Sentai Go-onger is Samurai Sentai Shinkenger.
The 4WD switch is located in the transfer case. It is possible that you have a broken wire that is making intermittent contact. Download the FREE Suzuki Samurai Shop Manual from http://www.suzukiinfo.com/ or visit zukikrawlers.com zn
To get the fuel pump to go on and off with the car it is usually connected to the ignition 'on' connection of the switch (sometimes called 'ACC' or accessory). This way the fuel pump goes on when you turn the key to start the engine and is turned off when you turn the key to stop the engine.
meaning something's wrong with your engine, go to your car shop and have it diagnosed.
we did a conversion on a 410 and had to weld mounts off a 413 chassis we had ! !...hope this helps.
I'm sure you have already fixed or sold the rig, but for anyone needing info on this, there are 2 ways to find out. Get the Chiltons repair manual and browse that, or go to www.autozone.com, input your vehicle, and click on "Vehicle Repair Guides" under the Repair Info drop-box. After that, click "Engine&engine Overhaul". Once there, click "Cylinder Head" in the right-hand subsection, and read every word thoroughly. For more information about 4x4 Suzuki's, visit www.zukikrawlers.com
On the oil pan below the engine. Go to GSResources if you need more help.