You would need to purchase the correct bellhousing, then it should work out fine.
NO it will not.
All Chevy transmission will bolt right to it up to the year 1999. After that year Chevy REDESIGNED the engines and transmissions.
It is bolted in the drivers side of the transmission tail shaft housing. That is were the driveshat fits into the transmission. It is held in place with 1 bolt.
Yes, "A" 1994 mitsubishi eclipse transmission will fit a 1992 mitsubishi eclipse, IF and only IF it's the right one 6 bolt fits 6 bolt and a 7 bolt fits a 7 bolt. Make sure you know Fwd and Awd and if it's 5 speed =)
nv3500
no it only fits 2.2 chevy
Most likely a 4L60E
An automatic transmission to bolt up to the original 1959 6 banger would have to come from a 1962 or older chevy/GMC 6 pickup or passenger car. 1963 and newer is completely different.
M5od-r1
4l60e which is a over drive fits from 1993 to 1998 note when changing transmission flush out transmission side of radiator you do not want to contaminate your new transmission
It is round in shape with an electrical connector pluged into it and it is on the drivers side of the transmission tail shaft were the drive shaft fits into the transmission. It is held in place with 1 10 mm bolt.
Yes