Want this question answered?
What effect will be there on the motor (Induction) output power when a 100kW 50hz motor is connected to a 60hz power supply.
One way would be to hook it up to a supply (by itself, with no load) and measure the speed with a contact tachometer. If your supply is 60Hz, and the motor speed corresponded to one of the standard motor speeds, it would be a pretty safe bet you had a 60Hz motor. If the speed was about 20% faster than a standard speed, the motor is probably a 50Hz motor. Or 20% slower if you were running a 60Hz motor on 50Hz For instance, a 1750 RPM 50Hz motor would spin at about 2100 RPM if you ran it on 60Hz.
No
nothing
It would involve some electronics work but it could be done. Might add that it could be more expensive than just buying the proper power supply. Use Use 220V 60hz motor to run 110V 50hz Generator.
It will not work at all.
No! Normally not, the recistance in the windings is to hig on 60Hz and the pump motor has not power enough to work propelly. This happened to myself when I connected my Whirpool AWE 7519 to 230V 60Hz. Europian model for 50Hz.
yes
Yes. It will make your motor a little faster though, so it depends on what you are powering with this motor. IE Can the piece of eguipment be ran faster?
Most likely, yes. Most devices has been manufactured with an idea that they will be used in areas where the supply power frequency is 50 or 60Hz.
A motor-generator or a solid state power converter can do this.Motor-generators are an old electromechanical technology. In this case you would use a 240V 50Hz synchronous motor and a 110V 60Hz generator with their shafts connected so the motor turns the generator.Solid state power converters use a high power rectifier to convert the input AC to DC, a precisely tuned oscillator to set the output frequency, and a high power class AB push-pull amplifier powered by the high voltage DC and driven by the oscillator to generate the output voltage.