0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can airport x-ray machines damage 400 speed camera film?
No
What is ISO speed?
ISO speed denotes the sensitivity of the film or the sensor in your camera... For example would be, you would use ISO 100 or ISO 200 for shooting pics in the daylight, while you would use ISO 400 for indoor and evening shots. And ISO 800 for night shots. However, you need to realise that in digital cameras, higher ISO speeds of 800 and more gives a lot of digital noise, because of higher sensor voltages. Ronnie --- http://www.propix.in
If you ran 400 m in 80 seconds what would be your speed?
400 meters/80 seconds = 5 meters/second.
Why do you need to worry about the film speed when purchasing you film?
Speed of film is critical for several reasons:Will your camera take photos correctly with the speed of the film.What are you photographing?What light conditions will you be working with?What quality level and size do you want your finished pictures to be?Film speed is simply how fast the chemicals react to light.The faster the film and the faster they react the larger the grain size is, Think of it as less pixels.If you are taking a flash photo portrait in a studio setting and want a finished portrait 10 feet tall a 60 or even 40 speed film would be best as long as your camera can deal with that.If you are taking pictures of Motocross at dusk and you need no blur as the motorcycles are in frame then 2000 speed is what you want.General daylight Pictures of Friends and landscapes 200 or 400 film will work fine
What is the speed of a car that travels 400 miles an hour in 8 hours?
The speed appears to be 400 miles an hour. If you meant 400 miles, the speed is 50 miles an hour.
How long would it take to travel 400 km at 80 km per hour?
Time = Distance/Speed = 400/80 = 5 hours.
What does pushing film enable a photographer to do?
When a photographer pushes film, they use the film at a faster speed than it's rated for which allows for faster shutter speeds. Fast shutter speeds allow for capturing fast moving objects. If you push film, you need to let the lab that develops it know what speed you pushed it to so that they can process it correctly. Example: ISO 100 rated film can be pushed to ISO 200 or even ISO 400.
What is the average speed of an l39 training jet?
The Albatros' max speed is around 470 mph, so I would think the average cruising speed is around 400 mph.
What does ISO 400 speed mean?
'ISO' refers to the speed at which electronic image sensors (in digital cameras) and film (in film cameras) react to light to form a picture. So ISO 400 is just one particular setting from the range of options on your camera.'ISO' is not an acronym for a technical detail of the sensor. It simply stands for the organisation who devised the system and determined the measurements: International Organization for Standardization. The system is more or less standardized across film and digital photography., with the same aperture and shutter speed values, a film and a digital camera set to ISO 400 would produce similar results in terms of exposure.It's a decent rule of thumb to stick to ISO 100 (or the lowest option on your particular camera) whenever possible. The higher the ISO, the lower the quality of the image. So with a faster sensor/film (which makes low light digital photography much easier) you sacrifice some quality.Whilst digital cameras are capable of ISO speeds much faster than 400, and the image quality at this speed will remain quite good, it is faster than required for most shots.
The speed of 28m's how long would it take to travel 400m?
If the speed is 28 metres per second then 28 metres is covered in 1 second. Therefore 400 metres is covered in 400/28 = 14.2857 seconds (4dp).
What has a maximum speed of 400 Mbps?
A Fire Wire 400 cable.
What is the maximum speed of truck dodge d-400 diesel 6cyl 102hp 1965 No load and with the differential ratio of low?
The maximum speed for a Dodge truck would be between 100 and 120. I would not try and go that speed.
