answersLogoWhite

0


Best Answer

They are two stage bulbs two bulbs in one one of the filaments must be out being the one for your brake lights enjoy

If the bulbs check okay, check the brake light fuse, if the fuse checks okay, the brake light switch may be out of adjustment or faulty.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: You apply the brakes brake lights don't work but the turn signals light up?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why do the turn signals stop blinking when the brake is applied in a 1989 Chevy pickup?

If the vehicle is equipped with a trailer light plug, the wires for the brake lights and the turn signals have been connected together, which is common, as many trailers do not have separate lights for brakes and turn signals.


2007 dodge ram 2500 4x4 diesel brake lights not working third brake lights does. running and turn signals work. and all trailer lights work?

we are having back brakes problems


Why would brake lights not work on 2002 Chevy Suburban when fuse switch and bulbs are good?

No brake lights but turn signals work? Turn signal switch brakes route through it.


How do you wire an electric brake controller for an RV onto a Semi tractor where the brake and turn signal lights are wired separately to make the electric brakes turn signals and brake lights work?

I found it easier to use the wires to the tail lights on the tractor.


Why would your rear turn signals work but not the brake lights?

A wire may be cut from the brakes. the turn signal wire is still connected


Why do interior lights go on when brake is applied?

There probably is only one cause for your interior lights to go on when you apply the brakes. There probably are brake light wires and interior wires that have warned together.


My brake lights or turn signals don't work on my Cadillac deville?

How do you replace brake lights


Can you use your brake lights and turn signals at the same time?

There is essentially no restriction on using brake lights and turn signals at the same time, as they both signal actions/intentions that are often used in conjunction with one another. The brake light signals that you are using your brakes and slowing down, and the turn signal shows your intention to turn. As you will usually slow down as you come up to a turn, there will be many situations where both signals will be on at the same time.


Why won't my 1992 grand marquis shift out of park?

APPLY BRAKES AND SEE IF BRAKE LIGHTS COME ON. IF NO BRAKE LIGHTS, REPLACE THE BRAKE LIGHT SWITCH LOCATED ON THE BRAKE PEDAL ARM AND THIS SHOULD ALLOW YOU TO SHIFT OUT OF PARK. IF THAT BRAKE LIGHT SWITCH IS BROKE, YOU WON'T BE ABLE TO GET IT OUT OF PARK


Why do my turn-signals and brake-lights work w lights off but when lights are on the turn-signals don't work right and nothing works when I hit the brakes?

You have a short, you also may have to check your bulbs i found on one of my blinkers the bulb was faulty, i replaced it and everything was all fine again.


95 Dodge Intrepid turn signals or brakes don't work?

Check bulbs--they are dual filament smaller is for brake and turn signal --larger is for tail lights


How many fuses control the turn signals and brake lights?

It depends on the vehicle but in general you would have one fuse for the signals and one fuse for the brake lights.