moister could be getting in the cap and rotor or the distributor is bad
It is used in extremely cold climates to aid in starting. The block heater keeps the fluids warm for a much faster start.
The OEM style block heater I have for the 1.0L 3 cylinder mounts on the outside of the engine under the intake manifold. An external block heater.
In most cases its plugged into the passenger side lower rear freeze plug
plug it in and screw on the outside nut
The Toyota Camry block heater is located on the front of the engine block. You can follow the block heater cord to the block heater.
A block heater is not standard equipment.A block heater is not standard equipment.
Remove and engine block expansion plug. Insert the block heater. Seal the block heater. Attached the wiring harness to the block heater.
The 2002 PT Cruiser block heater is located on the front of the engine block. You should be able to follow the block heater cord to the block heater.
The Pontiac G6 block heater is located on the right hand side of the engine. The block heater can be located by following the block heater cord.
Begin by training the water from your 2003 engine block. Remove the wiring harness from the block heater. Remove the block heater retaining bolts. The block heater will come out. Reverse the process to install your new block heater.
It does not have a block heater.
Are you are talking about the block heater or the heater fan. It looks like a two part question. The block heater plugs into a house outlet. The cord starts at the front bumper area and goes to the block. A element goes into the block to heat the engine coolant. To trouble shoot: Power from the house plug in a lamp. Cord from the bumper to block heater, Inspect for damage & ohm out the wires. If all checks fine the block heater maybe defective. Now for the fuse. Is it blowing out all the time & does it go to the heater fan.