Want this question answered?
It is on the bottom left side of the timing cover that's bolted onto the front of the engine. It's behind the harmonic balancer.
Where is the crank sensor located on a 94 ranger 4.0 motor
FIRST BRING UP THE # ONE PISTION ON CRANK SHIFT MARK ON TOP X THEN MATCH THE KAM SHIFT MARK TO CRANK {:} TRY THIS GOOD LUCK? {BEEN THERE}
i have that problem to it has something to do with the gear shift censor
No.
The Chevrolet Lumina shift solenoid can be found on the top of the transmission. The shift solenoid will be near the front of the transmission.
All of the shift solenoids are part of the solenoid pack on the front of the transmission, below the cooler hoses.All of the shift solenoids are part of the solenoid pack on the front of the transmission, below the cooler hoses.
The indicator panel should by carefully pried out. Then you can change the bulb.
Yes you can. Upgrades will be needed but then is common with most bikes when being motorized. I've installed a Staton Inc. crank drive system. This allowed the auto shift feature to be kept. A Robin Subaru EHO35 engine drives a 18.75:1 gear box. The gear box drives the crank. This means the motor and/or peddles can use all 21 gears. The front three are manually shifted and the rear seven shift automatically. There are some techniques you'll need to learn to keep the shifting smooth. Afterwards you'll find it works great.
Your shift solenoid is located at the front side of the transmission housing to the left of your exhaust manifold. If you are standing in front of the car, look below the distributor and you should see two solenoid sets. The bottom is your shift solenoid.
There is a staple on the front of the gearshift just below the knob, remove it and lift the shift knob.
Shift your weight forward while applying the front brake.