If everything on your car ( thermostat, heater core, heat controls, water pump) has been changed and you are sure that it all works, check the water flow. A clog or an air bubble in the heat lines will cause coolant to not flow and have no heat output.
What is the 40 fuse for & what is not working.
yes i changed all of that but it still is not working so im wondering what else could be causing this
birde
I own a 2005 jeep Cherokee my headlights on the passenger side is not working changed the bulbs & they are still not working.
check your fuses
If "everything" is working that means you are still getting power but if it won't turn over you should check your starter it would have something to do with it not getting a spark.
i have a 1990 Chevy van cargo left hand turn blinker not working (rear) all other lights work change out bulb still not working
I have changed resistor a d blower motor still not working, maybe i missed a fuse or could the control switch not work?
Because he is still working on it.
Chack the speed control switch and the resistor that controls the speed of the motor
Could be 1 of 2 things ...1- heater core is plugged up.. 2- could have a valve on one of the heater hoses..if so it might not be working usually vacuum activated.
Where is it leaking from? Could be front or rear seal or coolant lines Did you change gasket when you changed fluid?