The zenith universal remote codes to program a symphonic television are 0091, 0053, 0155, and 0126. A universal remote can be used to operate a number of brands of one or more electronic devices.
What are the codes to program a zenith mbr3455 universal remote for a zenith DVD player
i have a remote with no name..how do i program my symphonic tv
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
You must access the menu fuction.Autosearch or manual add or erase channels.
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
A few different DISH Network remote codes for your Senith TV that you can try & one should successfully program your remote are, 501, 006, 899, or 585.
The remote codes for a Zenith TV VCR combo vary greatly based on the model of universal remote. Some use 153 and 154, while others use 172.
To program a Symphonic TV with an RCA RCR-612 universal remote, there are four codes which you can try. Those codes are 1033, 1038, 1046, and 1047. To try the codes, press and hold the TV button on the universal remote. After you enter the fourth digit, the power light will turn on. Once the light is on, release the TV key. If the power light turns off, you have the correct code and can now use the remote. If the light blinks, it isn't the right code and you need to repeat the procedure until you find the right code for your particular TV.
Symphonic DVD player WF-104 code for RCA universal remote model RCR311S is 30675. If this one doesn't work for you, then you just need to download the official Owner Manual for your particular remote. The RCR311S owner manual was in pdf online! Best Wishes-this can be a very frustrating problem!
I needthe code for a17g0200 item 564351 for symphonic please
Try the link and see if your units owner's manual is listed. Link to it and read the instructions to get the scoop. Note: If you do not have the original remote and are attempting to program a universal replacement to work on your Symphonic set, you may be unsuccessful. Symphonic has a number of sets with "oddball" remote codes that are not included in universal replacements. There are 800 numbers to the companies that make the universals, and they can tell you if their unit will work on a given make and model number. You may also be able to find this out online at the remote control manufacturer's site. Good luck.
Remote: Basic Remote (Television Only)Turn the Television On.Press and hold the TV Power button for three seconds until the LED flashes.Press and release the TV Power button.Press and release the Up or Down Arrow on the remote until the television turns off.After the television turns off, press and release the OK button.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.i have provided a link where you can program your remote to your TV. Select your receiver model at the bottom of the page, which will open a PDF file with the codes for different TV manufacturers. Find your TV brand for the codes.Here are more codes for your TV: 527, 541, 569, 587, 646, 679, 682http://www.dishnetwork.com/SupportSection/setup-remoteRay CaloDISH NetworkThe codes from the manual for Symphonic are as follows:632, 657, 662, 677, 692 & 694