torque specs in Nm and tightening esquence
Astra f 1800cc 16v renew bolts 25nm 90 degrees 90 degrees 90 degrees
2003 Kia Optima 2.4, 16 valve.what are the cylinder head bolt torque specs torque at?
16 ft lbs
torque settings for mains,big ends and cylinder head Opel Corsa 1.7diesel 2000
18 lb/ft +70, +70, +30 Degrees using angle gauge,
If it's a B2600I,they are 21ft. lbs first step,,42 ft lbs. second step,,59 to 64 third step this is for the larger bolts,the 2 small bolts cylinder head to timing chain cover are 12 to 16 ft. lbs.Hope this helps,,toro2
There are two valves per cylinder, and eight in the virginal b230, but they also made a dual over head camshaft 16 valve cylinder head, these are less common. There are two valves per cylinder, a total of eight in the virginal b230, but they also made a dual over head camshaft 16 valve cylinder head, these are less common.
Good morning I have a 2014 peugeot 207 1.4 16 valves I need the torque spec on a head cylinders please
316i engine code 16 4E2 Head bolts must be renewed Torque settings stage 1. 30Nm stage 2. + 90 degrees stage 3. + 90 degrees Tightening sequence 7 5 1 3 9 10 4 2 6 8 Bolts 7 & 10 are the flywheel side of the engine
5/16 bolts 25 ft/lb
The head bolt torque specs for a 1999 Yamaha RT 100 is 16 foot pounds. Specs can be found in Yamaha repair books.