answersLogoWhite

0


Best Answer

Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

For a 1998 Audi Quattro with a Delta radio, the button combination is DX and FM1/2.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

11y ago

Call Audi of America 1-8008222834, you will need vin # ( off your registration or inside dash near drivers side visible through windshield )) and your auz # located in two places . The 1st in the wheel well of your spare tire in trunk. the 2nd the bottom of radio.( which requires removing radio from dash and turning over) Take your pick, this part is the hard part. Now the good news after a brief registration with your Audi rep and then reading them those 2 #'s you will get your code FREE of charge. I ran across a site that wants 79.95 for this info , or you can go to the Audi dealer and they will do same for a service charge. So try and locate the auz# which is the hardest and you will be set.

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

Along with the original car owners manual you should have a radio manual including a card (credit card size) that has the correct "code" number for your radio - usually a 5 digit number. If you do not have the code then you need to visit a BMW dealer who will check your radio's serial number and look up the matching code.

Once you have the code you can; switch on the radio, do not touch any other buttons but enter the code into the radio using its memory number buttons. The radio should "beep" after you enter the last digit and then work as normal. Three failed attempts and you may need to disconnect the car battery, wait for 10 minutes or so, then reconnect the battery and re-enter the code.

A last resort could be to disconnect and reconnect the car battery and then start the car, set up the clock, turn on the radio but DO NOT enter the code, leave the car running (in a well ventilated area) or go for a drive with the radio "on" for 1 hour and 15 minutes continuous (minimum) and then finally entering the code.

Failing all that - see a dealer.

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

Call an Audi dealership and ask the parts and repair department

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

You click the save button twice and then power on and off

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you reset radio system on A6 Audi?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Audi A6 2009 serice light reset?

You will need to take the 2006 Audi A6 to a mechanic to have the service light properly reset. In some cases, a person can undo the battery to reset the light.


Where is the radio fuse on the Audi a6?

On the 2001 Audi A6 its on drivers side behind a panel on left of dash board.....


How do you get a 1996 Audi A6 radio off safe mode?

I have an 1996 Audi Quattro A6 i changed my batteri and my radio went to safe mode. How do i get my radio off safe mode?


How do you reset radio after changing battery for Audi A6 1999?

You have to call your nearest Audi dealership and address your problem to them. Have your VIN (Vehicle Identification Number) ready. They will ask you for it. If the radio is not originally from the car, you will have to have the serial number to the radio ready. They will after tell you the code via phone.


How do you reset Audi A6 service indicator?

The service indicator on an Audi A6 can only be reset with something called the VAGCOM. One may be found on line but it would be better to take in into an Audi dealership or authorized mechanic because more damage can be caused.


How do you reset service reminder on 2008 Audi A6?

You need VAGCOM software to do so.


How do you reset service engine light on Audi A6?

by going to an AutoZone store and having them reset it with their handheld computer system that plugs directly into the information port under the dashboard on the drivers side


Audi A6 Quattro driver information system?

Driver Information System not working


Do a Audi a6 98 engine fit in a 2001 Audi a6?

yes you can do that.


Where is the cabin filter on Audi a6?

Where is the cabin filter on 2007 audi a6?


What is the difference between Audi A4 and A6?

B7 Audi A4 C6 Audi A6 ~200kg


Are the any Audi a6 deals online?

Yes, and it depends on what kind of deals you're looking for. There are used Audi A6 deals and even new Audi A6 discounts. You may even find Audi A6 on clearance.