This has worked on my 2007 Chrysler 300
Programming Additional Keys.
Must have 2 Existing Pre-Programmed Keys.
1. Insert one of the pre-programmed transponder keys into the ignition lock cylinder and turn the switch to the ON position.
2. The key should remain in the ON position for 5 seconds but not more then 15 seconds before you turn it back to the OFF position.
3. Within 10 seconds, insert the second pre-programed transponder key into the ignition lock cylinder and turn the switch to the ON position. The VTSS(Vehicle Theft Security System) or Sentry Key Immobilizer System lamp (depending on model ) should start to flash. This along with a audible tone will indicate to you that the system has entered the "Customer Learn" programming mode.
4. Within 45 seconds, turn the switch to the OFF position. Insert the new transponder key and turn the switch to the ON position. After approximately 10 seconds an audible tone will sound and the Indicator lamp will stay illuminated for 3 seconds. This will be your acknowledgement that you have successfully programmed in the new transponder key.
5. To add additional keys, repeat steps 1 through 4.
2 PROGRAMMED KEYS MAY BE REQUIRED FOR SELF PROGRAMMING, PLEASE CHECK YOUR OWNERS MANUAL OR LOCAL DEALERSHIP FOR THESE DETAILS.
__________________
The Chrysler 300 key FOB must initially be programmed at the Chrysler dealership. You can use the Chrysler dealership FOB code to change the initial code to your personal code.
Possible weak remote battery or failed remote.
The dealers scan tool is required.The dealers scan tool is required.
A scan tool is required to program a fob on a 2006 Chrysler Town and Country.
The dealer scan tool is required.
The fob may be defective or it may have lost programming.
The dealers scan tool is required.
I use the dealer's scan tool.
The dealers scan tool is required.
You have a failure with the key or the computer that senses the chip in the key.
Just call Parts, the battery costs $6.00 you can replace it yourself.
go to programyourremote.com and it will tell you how to do it for free.