Want this question answered?
If the valve cover is leaking it may let oil flow down the head and make the Head gasket appear to be leaking. Clean the engine and then use oil dye or watch for leaks. If there is a coolant leak it is not the valve cover.
Never use sealant for a head gasket! It is used as a quick fix for cracks in the gasket but will not last very long. Safer to get the job done correctly.
No! I can't use.
Yes. -Unless your manual specifically calls for it, you never use anything but the recommended gasket
dont do it !
you should never use a sealant on a head gasket as that is only a temporary fix in an emergency situation. The only permanent fix is to replace the gasket.
Not likely.... I'd never use anything "temporary" on a head gasket.
NO! These type products are only an emergency repair. The only permanent repair is to remove and replace the blown gasket. Besides these type products can cause clogging of the cooling system. Do not use them.
nanotechnology is high demand in India or in usa.
No, the type air filter you use will have no detrimental effect on the head gasket. Head gaskets normally blow due to engine overheating.
No. I tried to put a normal head gasket on my banshee and it leaked coolant like crazy! you have to have the o-rings!
Definately use a new head gasket no question about it.. The only reuseable head gaskets are from full out race engines. Usually customed milled from a sheet of copper and most of the time reuseable for a set number of uses...