Turn signal indicators are lights. The flash to tell you, or indicate, that a turn signal is on, and which way the lights are flashing.
After replacing the burned out turn signal bulb, turn on the hazard flasher and then turn off the hazard flasher. This will reset the flashing on the turn signal from super fast to standard flashing.
Either the front or back turn signal bulb is out
change the bulbs and fuses
turn on your turn signal and look for the bulb that's not blinkingAnswerThe light that needs to be replaced will be the one that is not flashing. You need to turn on your turn signal and walk around the vehicle to see which one is not flashing.
You have a turn signal light-bulb out .
Your turn signal probably is not flashing because the turn signal lightbulb is burnt out. You could also have a loose wire on the turn signal.
Turn on the RIGHT turn signal then get out of the vehicle and see which lights are flashing. Count the number of bulbs that are flashing on the back of the vehicle and on the front. Then turn on the LEFT turn signal and check again. Usually a rapid turn signal indicates that one or more bulb has failed.
Replace turn signal flasher
Replace the turn signal flasher relay.
I've seen some turn signal dash indicators that stay on without flashing just when a bulb is burnt out. If the signal itself is flashing, and especially if the turn signal arm doesn't automatically retract when you turn, there may be a broken spring in the canceling cam inside the steering column.
Usually means the bulb is out. Turn on the turn signal then go out and see if the signal light is flashing.