0
8 (eight) bits to a Byte
B (big B) = Byte
b (little b) = bit
2MBps = 16Mbps
Wiki User
∙ 15y ago
Wiki User
∙ 15y agoif DUR is the bit duration in multiples of the time step , total bit duration= dur *time step bit rate= 1/total bit duration. if your time step is single , then bit rate =1/bit duration.
Wiki User
∙ 16y ago500 bits per second
Anonymous
48 m sec
480 m sec 4800sec
4800m sec
48000m sec
Add your answer:
Earn +20 pts
How many kbps is 10 mbps?
1,000,000/1,000 = 10001 kbps = one thousand bits per second1 mbps = one million bits per second
Which is better higher Mbps or lower Mbps?
It is desirable to have a higher Mbps in almost all cases. Mbps = Mega bits per second. It describes the throughput (or bandwidth) or data through a network interface.
How do you convert MHz into mbps?
You can't ! MHz or Megahertz is a measurement of frequency - mbps or mega-bits per second is a measurement of data transfer speed.
How fast is 8 MBPS per second?
it's the rate of how many mega bytes are downloaded/uploaded per second so in your case it's 8 megabytes per second which is quite fast. To answer this correctly we need to understand what is being discussed due to the confusion of terms. File size -: are normally quoted as Mbytes where each byte consists of 8 bits of data. Communications -: is normally quoted a Mb/s or Mbps which is bits per second. and normal serial communication is 8N1 or 8 bits, No parity, 1 stopbit Also with communications we have the underlying communications protocol overhead which can be very high particularly with applications that use small packet size, eg VoIP and some web apps. Most people talk of their DSL link as MBPS but must remember that is the speed of the link including overhead and is BITs not Bytes therefore not a direct relationship to the file size.
What speed is faster 126kbps or 1.5mbps?
mbps stands for megabytes per second. So would 100 megabytes per second or 1.5 megabytes per second be faster? A: 100mbps
What do mbps and kbps mean?
kbps > Kilo Bits Per Second > 1024 bits per second mbps > Mega Bits Per Second > 1024 kilo bits per second
512Kbps to Mbps?
0.5 Mbps.1 Mbps (Mega Bit per Second) = 1024 Kbps (Kilo Bits per Second)
100 mbps equals how much k bits?
1 mbps (mega bits per second) = 1000 kbps (kilo bits per second) as defined by IEEE. So, 100 mbps = 100,000 kbps.
What is mbps?
Mbps is "millions of bits per second." It is a measure of bandwidth on telecommunications medium.
How many kbps is 10 mbps?
1,000,000/1,000 = 10001 kbps = one thousand bits per second1 mbps = one million bits per second
How many Kilobytes per second is 100.0 Mega bits per second?
100 megabits per second (Mbps) = 12800 kilobytes per second (KBps)
What are gbps and mbps?
these are types of internet speeds, music quality is measured in kbps (kilo bytes per second) and internet speed is measures in mbps (mega bits per second) and gbps (giga bits per second
What does mbps means in a wireless router?
mega bits per second
Lan speed is measured in?
LAN speeds are measured in units of millions of bits per second (mbps) or billions of bits per second (gbps)
What is a 6Mbps?
6 mega bits per second (equavalent of 6 million bits per second). If this is the speed of your internet, it is raesonable, but far from the fastest. Many countries now will offer connections at 1000 Mbps.
What are Mpbs?
MBPS is Standing for Mega Bytes Per Second. This is a Internet Term. Stands for "Megabits Per Second." One megabit is equal to one million bits or 1,000 kilobits. While "megabit" sounds similar to "megabyte," a megabit is roughly one eighth the size of a megabyte (since there are eight bits in a byte). Mbps is used to measure data transfer speeds of high bandwidth connections, such as Ethernet and cable modems.
What is the meaning of MBPS in Internet speed?
MBPS means Mega byte per second .It is actually the band width.In digital communication Bandwidth is measured in byte/second. Internet speed is usually quoted in Megabits per second. 1 byte = 8 bits.
